How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique procedure to add the second key. It requires dealer support using an electronic handheld computer called Tech-2. Then the transponder is replaced and a key are required to be purchased.
It is an excellent idea to rotate your keys in order that one doesn't get worn out more quickly than the other. This will also help keep your keys in good condition.
Replacement Case
The new key fobs aren't like the older Saab keys. They're equipped with electronic devices that make them difficult to duplicate. This has made stealing cars much more difficult than it was twenty years ago. However, it has also made replacing lost keys an incredibly expensive endeavor.
Every owner of a 9-3 Saab should have at least two functioning keys. If one is lost, it is expensive to get another one for the car because it involves replacing the CIM module and re-programming the locking cylinders. Dealers usually charge between $100 and $200 for this.
There are several ways to get around these high cost. Some parts dealers will search for the code on an old key (usually the same one that opens the doors and turns the ignition) and cut a new metal key blade at a fraction of the dealer's cost. The key must, however, be the same as the original to work correctly in your car.
Follow these steps to replace the case. You will need to have a flathead and patience. Using the screwdriver, slowly tear the plastic away and separate the emergency key from the case. After the case is open, remove all electronics and place them into your new case. Make sure you put the correct key and badge back into the case, as well.
Replacement Battery
The Saab 9-3 replacement battery is a low-cost part that can be easily and quickly replaced. The YouTube video of Cyclone Cyd demonstrates how you can replace the battery of the remote fob with only four steps. This tutorial can be used with any modern Saab key fob. However, G28CarKeys might differ slightly.
The first step is to locate the button that releases the backup key on the fob. This is usually located next to the Saab logo on the back of the fob. Next, use an screwdriver with a flat head to insert into the small hole inside this button. This will allow you to open the fob's case to allow you to replace the battery.
After the new battery CR1632 is in place You can then reassemble the remote key fob. You can then program it to your car. The entire process should not be more than an hour. It's a simple process that doesn't require any special tools.
The procedure is a little more complicated in the event that you lose the key, but it's possible. The dealer will need to read the car's VIN and then purchase a replacement key blade and TWICE module with the proper unique code. After that, they will need to cut the replacement key and then program it with a new software tool called MDI.
Replacement Key Fob
The key fob is a device that locks and unlocks your car. It has batteries inside. Batteries are able to last for a short time and will eventually fail. This is a problem that occurs for all vehicles. The good news is you can replace the battery in all key fobs, without having to replace the entire case. Amazon sells replacement fobs that have all the electronic components in place. It is easy to open the case and replace the batteries. It is important to keep in mind that you'll need remove the emergency key first. you can do this by inserting the small screwdriver flathead into the slot found in the middle of the case. The case should split when you move the screwdriver around it.
If you're looking to replace your keys, make sure you have a spare available. This will save you a significant amount of money. If you do have a spare, you can request that the dealer cut an entirely new key and then program it to your car, which is cheaper than replacing the whole key fob.
If you do not have a spare key, it is possible to add an additional key to your car, however this requires a lot of research and effort. The cost of adding a second key is a few hundred dollars, and it also requires the programming of the car's computer. Professionals can do this, but it's an expensive option.
Replacement Ignition
In contrast to the earlier Saab cars, the modern SAAB 9-3 models feature an advanced alarm system that is based on a coded key. If you lose your only key, it may be expensive to add another one because the car must have a specific computer installed and also be programmed to accept a brand new key. Dealers can charge hundreds of dollars to program a new key when they are not able to do it.
If you've lost only one working key and a dealer is able to replace your car's computer (known as the CIM or SAAB TWICE) to make an exchange, and they will charge you the highest price for it. Instead we can reprogramme the EEPROM in your current car computer to allow it to be programmed for a replacement key, and save you over 50% of the price you pay at a dealership.
If you've been a long-time owner of an 03-11 SAAB 9-3, you probably are aware that the ignition key isn't all that durable. They can get extremely sticky, and the buttons can fall off from time to time which is why you should think about getting a replacement if yours isn't working as it should. The good news is that replacing the ignition key isn't as difficult as it sounds, and it can be done fairly quickly using the right tools.